63 single cab ute resto

joeM · Post by **joeM** » Sat Jun 18, 2011 10:30 pm

bluebus wrote: Thats penetration from the out side weld.

Thanks for all the comments guys still a long way to go
Cheers Rick

ha ha I'm going to have to crank up my welder

bluebus · Post by **bluebus** » Tue Sep 06, 2011 10:41 pm

Hey there all
Been a while since i last posted on my resto because ive been busy with non kombi things but keen to get back into it now.
Here is some work ive done on the bottom of drivers door, drivers inner sill, drivers B pillar inner and outer and rear of front wheel well.

bluebus · Post by **bluebus** » Tue Sep 06, 2011 10:43 pm

bluebus · Post by **bluebus** » Tue Sep 06, 2011 10:50 pm

Some work on the passenger inner sill and passenger B pillar inner.

warb · Post by **warb** » Tue Sep 06, 2011 10:58 pm

nice clean work there mate..

bluebus · Post by **bluebus** » Tue Sep 06, 2011 11:03 pm

My neighbour who is into VWs helped me build a frame to roll Bishop onto his side. The two side sections pull out to go either side to roll it right or left.
It works really easy as one person can roll it over.
We based it on the one he made for his oval and the steel was just under $100.00
Now i need to find some castor wheels for pushing it back under house when on its side.

bluebus · Post by **bluebus** » Tue Sep 06, 2011 11:05 pm

joeM · Post by **joeM** » Tue Sep 06, 2011 11:09 pm

Wow you got into very corner of this baby
Absolutely fantastic

And I love the roller cage you made, simple but very effective

scutemmm · Post by **scutemmm** » Wed Sep 07, 2011 8:36 pm

Results look

bluebus · Post by **bluebus** » Wed Sep 07, 2011 10:59 pm

Passenger outer B pillar done.

HELMUT · Post by **HELMUT** » Thu Sep 08, 2011 11:14 pm

Nice work. Where was the outer b pillar from?

bluebus · Post by **bluebus** » Fri Sep 09, 2011 2:16 pm

Both outer B pillars were from roy at The bus stop (Autocraft) and fitted up good.
Cheers Rick

Leroy · Post by **Leroy** » Mon Sep 12, 2011 8:34 pm

Absolutely loving watching this resto. Super clean work as usual

bluebus · Post by **bluebus** » Sat Dec 24, 2011 12:05 pm

I have done some more work on the ute.
The passenger front wheel well rear section.

bluebus · Post by **bluebus** » Sat Dec 24, 2011 12:08 pm

Done a pre fit on passenger side to make shore that the short side and outer sill fits and all good.