Ozjeff's 66 westy
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
-
- DSKer
- Posts: 1759
- Joined: Wed Jul 11, 2007 5:28 pm
- Location: Wollongong
Ozjeff's 66 westy
Well I have started, pretty much stripped everything, ready for cutting out rust and blasting, heres some before pics
- Attachments
-
- IMG_3841.jpg (21.6 KiB) Viewed 3548 times
-
- IMG_3821.jpg (20.46 KiB) Viewed 3548 times
-
- IMG_3823.jpg (18.57 KiB) Viewed 3548 times
-
- DSKer
- Posts: 1759
- Joined: Wed Jul 11, 2007 5:28 pm
- Location: Wollongong
-
- DSKer
- Posts: 1759
- Joined: Wed Jul 11, 2007 5:28 pm
- Location: Wollongong
- Dasdubber
- DSKer
- Posts: 1847
- Joined: Thu Dec 01, 2005 10:18 pm
- Location: Gold Coast
-
- DSKer
- Posts: 1759
- Joined: Wed Jul 11, 2007 5:28 pm
- Location: Wollongong
Started stripping the paint and getting it ready for rust repairs, havnt fount much hidden rest yet, but the front has had a hit and has been heat shrunk though. Been using a combination of paint stripper and sanding pads, works well. Will probably get the door jams, window frames and a few other bits blasted.
- Attachments
-
- stripping.jpg (13.99 KiB) Viewed 1221 times
-
- stripping2.jpg (9.97 KiB) Viewed 1221 times
-
- stripping3.jpg (13.59 KiB) Viewed 1221 times
-
- stripping4.jpg (30.72 KiB) Viewed 1221 times
-
- stripping5.jpg (20.01 KiB) Viewed 1221 times
-
- stripping6.jpg (19.39 KiB) Viewed 1221 times
-
- stripping7.jpg (13.92 KiB) Viewed 1221 times
-
- stripping8.jpg (12.76 KiB) Viewed 1221 times
-
- stripping9.jpg (18.31 KiB) Viewed 1221 times
-
- stripping10.jpg (21.23 KiB) Viewed 1221 times
- Kuchster
- DSKer
- Posts: 495
- Joined: Sun Dec 02, 2007 10:12 pm
- Location: Sydney West
Looks like you've got it easy compared to some of us!
Hehe
Kuch
Hehe
Kuch
Kuch's Laser Cut Products
http://www.kuch.com.au/laser
http://www.kuch.com.au/laser
-
- DSKer
- Posts: 1759
- Joined: Wed Jul 11, 2007 5:28 pm
- Location: Wollongong
- Zimblewinder
- DSKer
- Posts: 1356
- Joined: Fri May 20, 2005 9:28 am
- Location: Geeeeeelong
- ppp
- DSKer
- Posts: 575
- Joined: Fri Sep 02, 2005 3:58 pm
- Location: Bangkok, Thailand.
- Contact:
- skidster
- DSKer
- Posts: 140
- Joined: Thu Dec 21, 2006 10:17 pm
- Location: copacabana nsw
-
- DSKer
- Posts: 1759
- Joined: Wed Jul 11, 2007 5:28 pm
- Location: Wollongong
Not sure when it will be ready, it will be heading to Tony in the first week of April for the panel work. Then from there it should progress pretty quickly. The only problem with the walkthrough is that it is a US walkthrough and the larger seat mount is on the wrong side, so the driving set up is wrong. I have a solution but need to talk to Tony and see if it will pass an engineers inspection. Not sure if I will be at Old Bar this year, would love to go but my favorite music festival has been apparently moved to the same weekend.
- no show
- DSKer
- Posts: 1102
- Joined: Tue May 17, 2005 8:31 pm
-
- DSKer
- Posts: 1759
- Joined: Wed Jul 11, 2007 5:28 pm
- Location: Wollongong
- Shaven
- DSKer
- Posts: 7420
- Joined: Tue Sep 19, 2006 4:17 pm