Hi all, Tarzan here,
finally scored myself a Splitty after having owned 2 beetles, 2 lic beach buggies and a type 3 in the past...
the bus is still a bare shell with a new 1600TP fitted. keeping it stock till it's licensed.
looking for some bits, currently looking for a front seat base or complete seat if need be. and either a rear seat or a rock n roll seat for the rear.
hope to find parts and pick peoples brains on here...
Hi from WA - 61 Split
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
-
Tarzan
- Newly Converted
- Posts: 6
- Joined: Tue Jul 29, 2014 5:52 pm
- Location: Bunbury WA
-
KombiMadness
- DSKer
- Posts: 783
- Joined: Fri Aug 12, 2011 8:13 pm
- Location: Sunshine Coast
Re: Hi from WA - 61 Split
Welcome to DSK, Tarzan. Plenty of knowledge here on all things Split...... 
Seats are a bit hard to come by but maybe somebody can help you out. Post up some photos of your new Splitty.
Seats are a bit hard to come by but maybe somebody can help you out. Post up some photos of your new Splitty.
My Dad's Kombi circa 1967 at Taronga Zoo. I'm the light weight with the skinny legs, my older brother is doing the roof jump!
-
Tarzan
- Newly Converted
- Posts: 6
- Joined: Tue Jul 29, 2014 5:52 pm
- Location: Bunbury WA
-
Tarzan
- Newly Converted
- Posts: 6
- Joined: Tue Jul 29, 2014 5:52 pm
- Location: Bunbury WA
-
Baronia57
- DSKer
- Posts: 85
- Joined: Mon Sep 08, 2014 8:14 pm
- Location: Melbourne
-
miki
- DSKer
- Posts: 21
- Joined: Fri Sep 19, 2014 9:09 am
Re: Hi from WA - 61 Split
Looks sweet. What's your plans mod wise?
-
Tarzan
- Newly Converted
- Posts: 6
- Joined: Tue Jul 29, 2014 5:52 pm
- Location: Bunbury WA
Re: Hi from WA - 61 Split
Hey Miki,
its got a rebuilt 1600TP, planning on basically a stock interior and exterior, with mods limited to things that can be returned to stock if required in the future. looking at the normal mods like lowered and a set of rims, it'll will be used for advertising for our body peircing shop. so some sort of retro sign writing will be placed on it as well.
its got a rebuilt 1600TP, planning on basically a stock interior and exterior, with mods limited to things that can be returned to stock if required in the future. looking at the normal mods like lowered and a set of rims, it'll will be used for advertising for our body peircing shop. so some sort of retro sign writing will be placed on it as well.
-
Squidy
- DSKer
- Posts: 800
- Joined: Sun Apr 08, 2012 5:19 pm
- Location: Sunny Coast Qld
- Contact:
Re: Hi from WA - 61 Split
Looks sweet