Page 19 of 19

Re: Forbes Soaring Bus [my 60 bus]

Posted: Mon Jul 25, 2022 7:51 pm
by D-Train
warb wrote: Sat Jul 23, 2022 11:15 pm Sure is man, you coming? Should I bring these doors? Rather not to be honest.. :) :) :)
If they don’t fit it’s all good. But……

Re: Forbes Soaring Bus [my 60 bus]

Posted: Mon Jul 25, 2022 7:52 pm
by warb
change of plan since last post.. i changed the rack from useless ones to a rusty useful one, can easily put em on the rack!.. lets make THE swap.. see you there mate, it think there is a guard and rim too........ :lol:

Re: Forbes Soaring Bus [my 60 bus]

Posted: Wed Sep 14, 2022 10:21 pm
by warb
ladder on.. handy as..

Re: Forbes Soaring Bus [my 60 bus]

Posted: Sun Sep 25, 2022 6:44 pm
by animal
Great work mate, cant wait to cruise with you guys soon.

Re: Forbes Soaring Bus [my 60 bus]

Posted: Mon Dec 05, 2022 7:09 pm
by warb
box swap time, held up as I need a ball joint puller thing for the drag link, ($40 on amazon, arrives tomorrow) new-ish box back in tomorrow avo, any suggestion on where to get my current one recod? will need to extract the snapped bolts 1st...

Re: Forbes Soaring Bus [my 60 bus]

Posted: Mon Dec 05, 2022 7:16 pm
by warb
animal wrote: Sun Sep 25, 2022 6:44 pm Great work mate, cant wait to cruise with you guys soon.
same man, summer is coming..

Re: Forbes Soaring Bus [my 60 bus]

Posted: Mon Dec 05, 2022 7:17 pm
by warb
....

Re: Forbes Soaring Bus [my 60 bus]

Posted: Mon Dec 05, 2022 8:02 pm
by braddick
My mate in Bordertown dose a few boxes for us Vic / SA guys
Just did 3 a few weeks back not sure when’s doing another round of steering boxes

Re: Forbes Soaring Bus [my 60 bus]

Posted: Mon Dec 05, 2022 8:35 pm
by warb
braddick wrote: Mon Dec 05, 2022 8:02 pm My mate in Bordertown dose a few boxes for us Vic / SA guys
Just did 3 a few weeks back not sure when’s doing another round of steering boxes
im all ears man, will sus it once i get it out.

Re: Forbes Soaring Bus [my 60 bus]

Posted: Wed Dec 07, 2022 8:54 pm
by warb
thanks again for the details man, reached out, however i think ill have a bit of a play here 1st.. cleaned up and pulled down, does not look too shit from what i can see, just the ripped bolts and helicoil stands out, some close up pics below, I will start measuring.. is that a factory seal?
PXL_20221207_082639717.jpg
PXL_20221207_082639717.jpg (216.39 KiB) Viewed 14486 times
PXL_20221207_082644849.jpg
PXL_20221207_082644849.jpg (290.65 KiB) Viewed 14486 times
PXL_20221207_082649110.jpg
PXL_20221207_082649110.jpg (279.94 KiB) Viewed 14486 times
PXL_20221207_082721121.jpg
PXL_20221207_082721121.jpg (119.15 KiB) Viewed 14486 times
PXL_20221207_082734918.jpg
PXL_20221207_082734918.jpg (119.67 KiB) Viewed 14486 times
PXL_20221207_083155057.jpg
PXL_20221207_083155057.jpg (186.82 KiB) Viewed 14486 times
PXL_20221207_083202049.jpg
PXL_20221207_083202049.jpg (262.54 KiB) Viewed 14486 times
PXL_20221207_083204520.jpg
PXL_20221207_083204520.jpg (334.21 KiB) Viewed 14486 times
PXL_20221207_083903503.jpg
PXL_20221207_083903503.jpg (291.23 KiB) Viewed 14486 times
PXL_20221207_083908257.jpg
PXL_20221207_083908257.jpg (219.13 KiB) Viewed 14486 times
PXL_20221207_083910117.jpg
PXL_20221207_083910117.jpg (191.5 KiB) Viewed 14486 times
PXL_20221207_083919780.jpg
PXL_20221207_083919780.jpg (241.77 KiB) Viewed 14486 times
PXL_20221207_083929417.jpg
PXL_20221207_083929417.jpg (279.96 KiB) Viewed 14486 times
PXL_20221207_083938985.jpg
PXL_20221207_083938985.jpg (285.95 KiB) Viewed 14486 times
PXL_20221207_084144603.jpg
PXL_20221207_084144603.jpg (172.63 KiB) Viewed 14486 times
PXL_20221207_084203432.jpg
PXL_20221207_084203432.jpg (151.72 KiB) Viewed 14486 times
PXL_20221207_092337826.jpg
PXL_20221207_092337826.jpg (163.98 KiB) Viewed 14486 times
PXL_20221207_092737841.jpg
PXL_20221207_092737841.jpg (164.96 KiB) Viewed 14486 times