55' sheep carrier
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
-
kombi1976
- DSKer
- Posts: 3744
- Joined: Thu Jan 25, 2007 2:59 pm
- Location: Southern Tablelands
Re: 55' sheep carrier
That is one sweet arse......
Cheers & God Bless
'62 Beetle
'62 Panel project
'67 Panel
'62 Beetle
'62 Panel project
'67 Panel
-
rabidkombi
- DSKer
- Posts: 643
- Joined: Sun Mar 27, 2011 8:48 am
- Location: Hills District,Sydney
Re: 55' sheep carrier
Any updates on the old girl?
-
chuck85
- DSKer
- Posts: 205
- Joined: Thu Apr 17, 2008 12:09 am
Re: 55' sheep carrier
Dont have any photos last phone died with all photos.
no major undates.
just mainly still working on the roof trying to get it straight
about 3/4 done.
have done few small rust repairs, pops out and safaris all
repaired n prime.
no major undates.
just mainly still working on the roof trying to get it straight
about 3/4 done.
have done few small rust repairs, pops out and safaris all
repaired n prime.
-
rabidkombi
- DSKer
- Posts: 643
- Joined: Sun Mar 27, 2011 8:48 am
- Location: Hills District,Sydney
Re: 55' sheep carrier
Thanks for the update mate 
-
chuck85
- DSKer
- Posts: 205
- Joined: Thu Apr 17, 2008 12:09 am
Re: 55' sheep carrier
Finally got the roof in primer
-
paul willans
- DSKer
- Posts: 2081
- Joined: Sun Jun 17, 2007 10:04 am
- Location: Bowral
Re: 55' sheep carrier
Looks nice and straight
clk500 AMG
64 s Notch
57 Boronia Brown bus
59 Pmg ute
62 Beryl Green bus
64 s Notch
57 Boronia Brown bus
59 Pmg ute
62 Beryl Green bus
-
kombi1976
- DSKer
- Posts: 3744
- Joined: Thu Jan 25, 2007 2:59 pm
- Location: Southern Tablelands
Re: 55' sheep carrier
Ditto.paul willans wrote:Looks nice and straight
Cheers & God Bless
'62 Beetle
'62 Panel project
'67 Panel
'62 Beetle
'62 Panel project
'67 Panel
-
chuck85
- DSKer
- Posts: 205
- Joined: Thu Apr 17, 2008 12:09 am
Re: 55' sheep carrier
Got a little bit more done. Top half of the bus is in primer. Getting there slowly
-
chuck85
- DSKer
- Posts: 205
- Joined: Thu Apr 17, 2008 12:09 am
-
kombi1976
- DSKer
- Posts: 3744
- Joined: Thu Jan 25, 2007 2:59 pm
- Location: Southern Tablelands
Re: 55' sheep carrier
Slow and steady.
Great work, Chuck.
Great work, Chuck.
Cheers & God Bless
'62 Beetle
'62 Panel project
'67 Panel
'62 Beetle
'62 Panel project
'67 Panel
-
gaz
- DSKer
- Posts: 212
- Joined: Fri Nov 09, 2012 3:04 pm
- Location: Perth WA
Re: 55' sheep carrier
Good work, a great transformation from what was quite a wreck
-
chuck85
- DSKer
- Posts: 205
- Joined: Thu Apr 17, 2008 12:09 am
Re: 55' sheep carrier
Slowly getting. Rest of body panels arrived.
Rear all outriggers and jacking points welded in, top hats repair and ready to weld in place. Front pass side outrigger jacking point weld and bulk head section repaired. Still need to clean up welds ect
Rear all outriggers and jacking points welded in, top hats repair and ready to weld in place. Front pass side outrigger jacking point weld and bulk head section repaired. Still need to clean up welds ect
-
chuck85
- DSKer
- Posts: 205
- Joined: Thu Apr 17, 2008 12:09 am
Re: 55' sheep carrier
Slowly getting there. Made new bottom section for bulk head, all welded now. Front floor only had the outside 1/3 sections, so made up some other section which were also rusted.front floor section tacked in place will full weld once doglegs are on.
Toolbox floor section welded.
Still need to clean up welds and straighten but its all coming together slowly
Rear floor trail fit converting from lhd to rhd.
Toolbox floor section welded.
Still need to clean up welds and straighten but its all coming together slowly
Rear floor trail fit converting from lhd to rhd.
- 20170507_155931.jpg (27.8 KiB) Viewed 2077 times