Then a couple of coats of poly primer over the repairs. Blocked. Now have the whole roof into high build primer…
'63 11 window
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
-
MID WEST DUBBER
- DSKer
- Posts: 1266
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: '63 11 window
The sides of the roof had a low spot, assuming part of the stamping process. Light skim of filler to take care of this and some slight warping from welding.
Then a couple of coats of poly primer over the repairs. Blocked. Now have the whole roof into high build primer…
Then a couple of coats of poly primer over the repairs. Blocked. Now have the whole roof into high build primer…
-
Kombiiknut
- DSKer
- Posts: 213
- Joined: Thu Oct 06, 2022 7:35 pm
Re: '63 11 window
Looks 
-
Cheeseboard
- DSKer
- Posts: 306
- Joined: Fri Sep 10, 2021 6:01 pm
- Location: Victoria
Re: '63 11 window
Keep chipping away Rusty. Paint stage a big step forward. Braddick has touch up paint if you need any.
Ideas man
Minister for Finance
Scared of wife finding out what I’ve spent
Minister for Finance
Scared of wife finding out what I’ve spent
-
MID WEST DUBBER
- DSKer
- Posts: 1266
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: '63 11 window
Long panel work continued. Got the bulk of the filler work done and got a good coat of poly primer on. Blocked that and fixed a few minor imperfections then touched up again for another round of blocking.
-
MID WEST DUBBER
- DSKer
- Posts: 1266
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: '63 11 window
Now into high build primer…
-
Kombiiknut
- DSKer
- Posts: 213
- Joined: Thu Oct 06, 2022 7:35 pm
-
MID WEST DUBBER
- DSKer
- Posts: 1266
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: '63 11 window
Something a little different on the hot humid days. Started making the interior panels..
-
splitthis
- DSKer
- Posts: 1536
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
Re: '63 11 window
Looking good mate. 3mm Masonite or using something else?
Chasing any Neiman steering lock parts, will consider anything.
-
MID WEST DUBBER
- DSKer
- Posts: 1266
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
-
MID WEST DUBBER
- DSKer
- Posts: 1266
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: '63 11 window
Short side and rear corner into high build
-
067DUB
- DSKer
- Posts: 2884
- Joined: Mon Oct 24, 2011 5:09 pm
Re: '63 11 window
Well done mate, exceptional work
-
splitthis
- DSKer
- Posts: 1536
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
Re: '63 11 window
Looking amazing mate, want to come down and give me some pointers?
Chasing any Neiman steering lock parts, will consider anything.
-
Kombiiknut
- DSKer
- Posts: 213
- Joined: Thu Oct 06, 2022 7:35 pm
Re: '63 11 window
We used a poly board for these and found it much easier to work with around corners..MID WEST DUBBER wrote: ↑Mon Jan 01, 2024 7:22 pmYes 3mm Masonite, top back corner we’re tricky to get right
-
Cam Biscuit
- DSKer
- Posts: 1516
- Joined: Sun Feb 26, 2012 4:56 pm
- Location: Radelaide
Re: '63 11 window
Awesome work Rusty 
-
greenmachine
- DSKer
- Posts: 139
- Joined: Sat Feb 03, 2007 2:07 pm
- Location: Adelaide
Re: '63 11 window
Hey Rusty, Nice work, i notice you havent got the trim panel retainers on your rear corners either side of the rear door, does yours not have them?