www.dsk.com.au

The sides of the roof had a low spot, assuming part of the stamping process. Light skim of filler to take care of this and some slight warping from welding.

Then a couple of coats of poly primer over the repairs. Blocked. Now have the whole roof into high build primer…

Looks

Keep chipping away Rusty. Paint stage a big step forward. Braddick has touch up paint if you need any.

Long panel work continued. Got the bulk of the filler work done and got a good coat of poly primer on. Blocked that and fixed a few minor imperfections then touched up again for another round of blocking.

Now into high build primer…

Oh

Something a little different on the hot humid days. Started making the interior panels..

Looking good mate. 3mm Masonite or using something else?

splitthis wrote: ↑Mon Jan 01, 2024 6:55 pm Looking good mate. 3mm Masonite or using something else?

Yes 3mm Masonite, top back corner we’re tricky to get right

Short side and rear corner into high build

Well done mate, exceptional work

Looking amazing mate, want to come down and give me some pointers?

MID WEST DUBBER wrote: ↑Mon Jan 01, 2024 7:22 pm

splitthis wrote: ↑Mon Jan 01, 2024 6:55 pm Looking good mate. 3mm Masonite or using something else?

Yes 3mm Masonite, top back corner we’re tricky to get right

We used a poly board for these and found it much easier to work with around corners..

Awesome work Rusty

Hey Rusty, Nice work, i notice you havent got the trim panel retainers on your rear corners either side of the rear door, does yours not have them?