Page 1 of 2

64 panel

Posted: Sat Mar 05, 2016 8:01 am
by tatvw
I picked up this 64 from Sam hutch (Aussie Kombi hunter) about 10 months ago, he found it in the dessert in South Australia, it had a engine fire and was parked up in about 1984, steel above engine and rear roof all rusted out due to the fire, parts of the floor also, standard rust repairs but not to bad considering it hasn't moved since 84, my plan was to keep it rat slam it and logo it up for my business, I think it's come along good and should have it finishe and regoed this month

Re: 64 panel

Posted: Sat Mar 05, 2016 8:02 am
by tatvw
Photo of where the panel was found and the doner bus

Re: 64 panel

Posted: Sat Mar 05, 2016 8:03 am
by tatvw
Rusted rear section and chopping up a bus that was not savable

Re: 64 panel

Posted: Sat Mar 05, 2016 8:05 am
by tatvw
Roof repair, if you ever have to replace the hinges watch out for the spring rods, cow when they come if they hurt

Re: 64 panel

Posted: Sat Mar 05, 2016 8:06 am
by tatvw
Rolling with a 4 in narrow bay beam and a straight axle in the back

Re: 64 panel

Posted: Sat Mar 05, 2016 8:09 am
by tatvw
I wanted it to match my other buses so hit it with a spray can and rubbed it back, it's ruff but that's what I was going for, shop logos will be hand painted on the side soon, and the white wall flappers will be changed back to just white, not a fan of the red

Re: 64 panel

Posted: Sat Mar 05, 2016 8:15 am
by tatvw
Went over the wiring, bus had the OG key rusted into the ignition, but of wd40 got that out sanded up the fuses run power and bang lights worked dash lit up, got the 1600 in replaces the main power to the started and it fired, I was pretty surprised the wiring worked at all, the 1600 had low compression on number 3 and a slight knock so I'm hoping it's just a sticky valve from sitting around or bent rod maybe, eather way I picked up a good running beetle this week to swap it out, I finishe all the interior yesterday. Still need to wire in stereo and some light, finish the brakes and one outrigger and its rego time

Re: 64 panel

Posted: Sat Mar 05, 2016 8:16 am
by 067DUB
Awesome work :D

Re: 64 panel

Posted: Sat Mar 05, 2016 12:00 pm
by chuck85
Very nice work

Re: 64 panel

Posted: Sat Mar 05, 2016 2:49 pm
by davidgrybaitis
That panel looks awesome

I like It.

Re: 64 panel

Posted: Sat Mar 05, 2016 3:51 pm
by KombiMadness
Amazing transformation from dumped, rusted, engine fire Kombi to alive and rolling! 8)

Great work! :D

Re: 64 panel

Posted: Sat Mar 05, 2016 5:07 pm
by Wassa
Good work, gotta love a rat panel... enjoyed the photos

Re: 64 panel

Posted: Sat Mar 05, 2016 6:10 pm
by ogrule
good thread you have done a great job

Re: 64 panel

Posted: Sat Mar 05, 2016 7:56 pm
by Cam Biscuit
Great work mate. Where'd you get the Hurst bar from?

Re: 64 panel

Posted: Sun Mar 06, 2016 2:57 pm
by tatvw
I scored the bar of tony wombell cam