58 mingo mango
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
-
- DSKer
- Posts: 970
- Joined: Fri May 17, 2013 1:07 pm
Re: 58 mingo mango
The money shot
Phillips head screws so no doubt a later install A bit of work in fixing up the long side card
Anybody got any ideas what these two strips of leather were used for, og to the bus so back they go on plus the 4 holes were still there for the screws Phillips head screws so no doubt a later install A bit of work in fixing up the long side card
- Attachments
-
- 60762737-AD36-4DB4-83DD-EA8E400D99E3.jpeg (160.07 KiB) Viewed 11348 times
- splitthis
- DSKer
- Posts: 1608
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
- Contact:
Re: 58 mingo mango
Looking good mate.
Maybe they hung/mounted something off the leather? Weird one.
Maybe they hung/mounted something off the leather? Weird one.
-
- DSKer
- Posts: 970
- Joined: Fri May 17, 2013 1:07 pm
Re: 58 mingo mango
Full pop outs installed
Both front doors and rubbers fitted
Both front doors and rubbers fitted
-
- DSKer
- Posts: 970
- Joined: Fri May 17, 2013 1:07 pm
Re: 58 mingo mango
And as they say in the industry gapped too perfection
Took some punishment from the roll over crash
But after closer inspection I’m glad it not left hand drive could be a bit draftee on that side
Got to love this door handle og to the bus and door Took some punishment from the roll over crash
- MID WEST DUBBER
- DSKer
- Posts: 1334
- Joined: Fri Jan 06, 2012 4:49 pm
- Location: Near Horsham, VIC
Re: 58 mingo mango
Looking ace Brad, coming together!
- Beatts
- DSKer
- Posts: 428
- Joined: Wed May 30, 2018 11:23 pm
- Location: Adelaide
Re: 58 mingo mango
That’s one cool looking bus coming together nicely. Great work Brad.
-
- DSKer
- Posts: 970
- Joined: Fri May 17, 2013 1:07 pm
Re: 58 mingo mango
Front pressed bumper fitted
Had to give a few things a tweak but we got there in the end
Had to give a few things a tweak but we got there in the end
- splitthis
- DSKer
- Posts: 1608
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
- Contact:
Re: 58 mingo mango
Like a glove! Nothing better than pressed bumpers, such a cool feature.
-
- DSKer
- Posts: 970
- Joined: Fri May 17, 2013 1:07 pm
Re: 58 mingo mango
Been trying my hand at a bit of Rolf Harris minus the wobble board and his other jail-able offences
Got the craft paints out and patina the quarter vents to match the door tops
Both drivers and passenger were completely different patina
Got the craft paints out and patina the quarter vents to match the door tops
Both drivers and passenger were completely different patina
-
- DSKer
- Posts: 393
- Joined: Wed May 06, 2009 9:31 pm
Re: 58 mingo mango
Been enjoying the thread until I noticed the campaign poster for the Chinese lad.
Please tell me it’s a drip tray or dart board backing
Please tell me it’s a drip tray or dart board backing
-
- DSKer
- Posts: 970
- Joined: Fri May 17, 2013 1:07 pm
Re: 58 mingo mango
Ha ha
My daughter goes to uni in Adelaide and like all good uni students they tend collect things on the way home from pubs and night club in the wee hours and yes penny came home because she knows how much I love the WONG
.
.
NOT
-
- DSKer
- Posts: 970
- Joined: Fri May 17, 2013 1:07 pm
Re: 58 mingo mango
Front door car resto or rejuvenate or just embrace what I have
Turn out the maggi rich gravy mix container is a good fit for inside the door pockets
Had to source a few chrome strips plus off more rooted cards and a bit quick grip around the edges plus a bit more flattering of the cards from water damage
Turn out the maggi rich gravy mix container is a good fit for inside the door pockets
Had to source a few chrome strips plus off more rooted cards and a bit quick grip around the edges plus a bit more flattering of the cards from water damage
-
- DSKer
- Posts: 1636
- Joined: Sat Jul 15, 2006 3:58 pm
Re: 58 mingo mango
Stop that Maggi thing, I’m about to go out and check if I have a door pocket for you
-
- DSKer
- Posts: 1636
- Joined: Sat Jul 15, 2006 3:58 pm
Re: 58 mingo mango
I’ll drop it off at Champs next week
-
- DSKer
- Posts: 393
- Joined: Wed May 06, 2009 9:31 pm