61DC project
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
- Kombiiknut
- DSKer
- Posts: 222
- Joined: Thu Oct 06, 2022 7:35 pm
Re: 61DC project
Oops files won't upload.. Compressed but but playing the game
- Kombiiknut
- DSKer
- Posts: 222
- Joined: Thu Oct 06, 2022 7:35 pm
Re: 61DC project
Back online, photos wont come up with phone for some reason.. But got it sorted
- Attachments
-
- Compress_20240315_184359_9796.jpg (303.74 KiB) Viewed 652 times
-
- Compress_20240315_184359_9586.jpg (156.63 KiB) Viewed 652 times
-
- Compress_20240315_184359_9301.jpg (308.47 KiB) Viewed 652 times
-
- Compress_20240315_184359_9070.jpg (228.24 KiB) Viewed 652 times
-
- Compress_20240315_184358_8732.jpg (373.56 KiB) Viewed 652 times
-
- 20240315_205940.jpg (315.63 KiB) Viewed 652 times
- splitthis
- DSKer
- Posts: 1546
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
Re: 61DC project
Looking good mate. For fear of sounding like “that guy” tail light holes for a 61 should have slots not screw holes, screw holes was a 58 only thing I think.
Chasing any Neiman steering lock parts, will consider anything.
- Kombiiknut
- DSKer
- Posts: 222
- Joined: Thu Oct 06, 2022 7:35 pm
Re: 61DC project
Zero difference when light fitted.. don't be that guy
This DC is being built to be a practical cruiser and will be far from perfect so I can use the shit out of it, without care or fear of scratches, dents or general abuse.
It will be far from OG..
- Kombiiknut
- DSKer
- Posts: 222
- Joined: Thu Oct 06, 2022 7:35 pm
Re: 61DC project
Front chassis mod done, and heater tube adjustment for the Wiz front Beam.
- Attachments
-
- Compress_20240320_084212_2858.jpg (128.57 KiB) Viewed 605 times
-
- Compress_20240320_084212_2182.jpg (154.85 KiB) Viewed 605 times
-
- Compress_20240320_084211_1778.jpg (154.17 KiB) Viewed 605 times
- Kombiiknut
- DSKer
- Posts: 222
- Joined: Thu Oct 06, 2022 7:35 pm
Re: 61DC project
Donor front beam and rear hubs sorted.
Yeah I know if it was a split, Wiz would save it
Yeah I know if it was a split, Wiz would save it
- Attachments
-
- Compress_20240325_203528_8031.jpg (716.84 KiB) Viewed 551 times
- splitthis
- DSKer
- Posts: 1546
- Joined: Wed Nov 28, 2007 8:47 pm
- Location: Adelaide
Re: 61DC project
Do you know where that bus came from? Looks like a bay I saw on a farm in Warnambool once when I picked up a splitty wreck.
Chasing any Neiman steering lock parts, will consider anything.
- Kombiiknut
- DSKer
- Posts: 222
- Joined: Thu Oct 06, 2022 7:35 pm
Re: 61DC project
Its been in out hillbilly circle for a while, reducing its mass slowly at each pick.. not sure of its history prior to this.. still a few good bits on it, which are about to be raided, then who knows of its next resting place. I will put it up on the local VW sites as a freebie, failing that it will be off to the scrap metal yard.
- Kombiiknut
- DSKer
- Posts: 222
- Joined: Thu Oct 06, 2022 7:35 pm
Re: 61DC project
Progress is progress right..
Got a few more items ticked off.
IRS legs in, rear shocker mounts removed, bit of welding here and there.
Half way through the steering box lift..
Got a few more items ticked off.
IRS legs in, rear shocker mounts removed, bit of welding here and there.
Half way through the steering box lift..
- Attachments
-
- Compress_20240409_190137_7860.jpg (360.37 KiB) Viewed 420 times
-
- Compress_20240409_190137_7639.jpg (454.24 KiB) Viewed 420 times
-
- Compress_20240409_190138_8065.jpg (377.53 KiB) Viewed 420 times
- Beatts
- DSKer
- Posts: 378
- Joined: Wed May 30, 2018 11:23 pm
- Location: Adelaide
Re: 61DC project
Kicking goals!
Are you going to blast underneath once the mods are done?
Are you going to blast underneath once the mods are done?
- Kombiiknut
- DSKer
- Posts: 222
- Joined: Thu Oct 06, 2022 7:35 pm
- rusty 55
- DSKer
- Posts: 566
- Joined: Wed Nov 28, 2007 8:56 pm
- Location: Adelaide
Re: 61DC project
The hoist must make it so much easier, looks great and will drive much better too
it’s got nuffin to do wiv yer “vor sprung Durch technic” ya know!
- Kombiiknut
- DSKer
- Posts: 222
- Joined: Thu Oct 06, 2022 7:35 pm
Re: 61DC project
A few more jobs ticked off, seat belt mounts all done.
Sand blasted underneath today and took it home for a coat of etch primer.
Blasting uncovered a few more jobs to get through, then some colour..
Sand blasted underneath today and took it home for a coat of etch primer.
Blasting uncovered a few more jobs to get through, then some colour..
- Attachments
-
- Compress_20240501_161643_3806.jpg (701.32 KiB) Viewed 236 times
-
- Compress_20240501_161643_3320.jpg (134.92 KiB) Viewed 236 times
-
- Compress_20240501_161644_4849.jpg (300.77 KiB) Viewed 236 times
-
- Compress_20240501_161644_4532.jpg (656.97 KiB) Viewed 236 times
-
- Compress_20240501_161644_4309.jpg (656.49 KiB) Viewed 236 times
-
- Compress_20240501_161644_4074.jpg (764.98 KiB) Viewed 236 times
- Kombiiknut
- DSKer
- Posts: 222
- Joined: Thu Oct 06, 2022 7:35 pm
- Beatts
- DSKer
- Posts: 378
- Joined: Wed May 30, 2018 11:23 pm
- Location: Adelaide
Re: 61DC project
Looks like you’re giving Wiz a race. Moving along fast now Lachy