64 neon electric singlecab
Moderators: warb, Rawdyn, Leroy, byronbus, Tonz Magonz, dmb
-
- DSKer
- Posts: 909
- Joined: Thu May 19, 2005 1:32 pm
- Location: hahndorf
64 neon electric singlecab
have just finished putting the L380 turkis paint on the underside of the ute, very hard to get into all the corners! hoping to have the rest of the body in paint next week, have fitted new nose (danish- anyone had issues with these?) had top roof skin off to metalfinish the dents, roof, nose and sides in primer. hope to have on the road for october, adelaide or melb show.
- Attachments
-
- tn_MVC-013S.JPG (6.54 KiB) Viewed 686 times
-
- tn_MVC-014S.JPG (6.25 KiB) Viewed 686 times
-
- tn_MVC-015S.JPG (6.54 KiB) Viewed 686 times
-
- DSKer
- Posts: 4516
- Joined: Mon May 16, 2005 12:56 am
- Contact:
-
- DSKer
- Posts: 206
- Joined: Tue May 17, 2005 10:03 pm
- Location: Byron Bay
- greenbus
- DSKer
- Posts: 440
- Joined: Thu May 19, 2005 11:55 pm
- Location: Canberra Australia
-
- DSKer
- Posts: 909
- Joined: Thu May 19, 2005 1:32 pm
- Location: hahndorf
split flipping
so long as its a matress with springs, and the shell is bare, lower one side on to matress. then lift other side up with jack, put under jackstands, then put trolley jack on large block and lift again. just befor it gets to half way, check weight balance, stop before u get past this point as it will want to keep going. then push over on side. not that heavy as balsnce point is high. helps with two people, but can do with one person.
-
- DSKer
- Posts: 42
- Joined: Wed May 18, 2005 8:42 pm
- greenbus
- DSKer
- Posts: 440
- Joined: Thu May 19, 2005 11:55 pm
- Location: Canberra Australia
-
- DSKer
- Posts: 909
- Joined: Thu May 19, 2005 1:32 pm
- Location: hahndorf
concrete floor
no good for my piles, and neither is burnt nipples from the mig welder!
-
- DSKer
- Posts: 4516
- Joined: Mon May 16, 2005 12:56 am
- Contact:
- splitdawhiska
- DSKer
- Posts: 138
- Joined: Sat May 21, 2005 4:13 pm
- Location: Adelaide South Australia
-
- DSKer
- Posts: 909
- Joined: Thu May 19, 2005 1:32 pm
- Location: hahndorf
more pics from when i got the ute
more pics
- Attachments
-
- tn_Ute0001.JPG (7.26 KiB) Viewed 590 times
-
- tn_Ute0005.JPG (8.72 KiB) Viewed 590 times
-
- tn_Ute0003.JPG (6.91 KiB) Viewed 590 times
-
- DSKer
- Posts: 909
- Joined: Thu May 19, 2005 1:32 pm
- Location: hahndorf
more pics from when i got the ute
more
- Attachments
-
- tn_Ute0007.JPG (6.05 KiB) Viewed 589 times
-
- tn_Ute0004.JPG (7.99 KiB) Viewed 589 times
-
- tn_Ute0006.JPG (7.31 KiB) Viewed 589 times
-
- DSKer
- Posts: 909
- Joined: Thu May 19, 2005 1:32 pm
- Location: hahndorf
progress pics
after blasting and with new nose welded and lead wiped
- Attachments
-
- tn_IMG_2361.JPG (6.88 KiB) Viewed 587 times
-
- tn_IMG_2364.JPG (8.53 KiB) Viewed 587 times
-
- tn_IMG_2366.JPG (9.53 KiB) Viewed 587 times
- splitdawhiska
- DSKer
- Posts: 138
- Joined: Sat May 21, 2005 4:13 pm
- Location: Adelaide South Australia